MAY-G300-BE Intelligent Liquid Baume Tester
Product introduction:
According to: GB/T13531, T5526, T5009, ASTM, JIS, ISO specifications. Apply Archimedes' principle of buoyancy method to quickly read the relative density and concentration of liquids.
Concentration coefficient: refers to the coefficient of relative density conversion to concentration. The relative density and concentration of a liquid cannot present an absolute linear relationship, but a certain curve relationship. This equipment uses
The unique 4-point curve algorithm converts the relative density and concentration of various liquids. The 4-point curve algorithm has higher accuracy than the 2-point linear algorithm. At different temperatures, the relative density conversion coefficient of the same liquid is not Similarly, this device has built-in more than 100 groups of liquid (ethanol, methanol, sodium hydroxide, sulfuric acid, nitric acid, etc.) concentration conversion coefficients at different temperatures.
 |
 |
 |
Digital display direct reading parameters:
Relative density
Specific gravity
Concentration
Baume degree
Brix
Alcohol degree
Water glass modulus
Application:
Chemical solution, alcohol, oil, water glass, any other fluid liquid
Technical Parameters:
Model | MAY-G150 | MAY-G300 |
Weighing range | 0.001~150g | 0.01~300g |
Density/specific gravity accuracy | 0.0001g/cm³ | 0.001g/cm³ |
Concentration accuracy | 0.01% (Accuracy can be set by the user) | |
Density/concentration resolution range | 0.001~99.999g/cm³ / 0.01%~100% | |
Concentration parameter setting method | Built-in more than 100 groups of sample concentration parameters, one-key switching on the touch screen | |
Features:
1. Touch control operation, one-key selection of liquid concentration coefficient, eliminating tedious setting steps;
2. Use a unique multi-point curve concentration measurement algorithm to test the concentration of various chemical liquids (such as alcohol, methanol, sodium hydroxide, sulfuric acid, etc.). Compared with the common two-point linear concentration measurement algorithm on the market, it has more points The curve concentration measurement algorithm has higher accuracy;
3. Built-in temperature setting compensation function, which can quickly set the temperature value of the liquid to be measured, and can also be equipped with thermostatic equipment to measure the density/concentration value of the liquid at a specific temperature (such as 25°C);
4. This instrument adopts microcomputer touch screen operation, all Chinese parameter settings, the operation is clear at a glance; and each operation step is reversible (for example: if there is a problem with the operation step, you can return to the step to operate again, without starting from the beginning) ；
5. Support user personalized function customization.
