Touch screen melt index meter
Model: MAM43-2
Introduction:
The melt index meter meets the standard requirements of GB/T3682-2000. The main parameters of the melt index meter also meet the requirements of ISO1133-97, ASTM1238, JIS and other standards. It can be used for polyethylene, polypropylene, polystyrene, ABS, poly Measure the melt mass flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials such as amide, fiber resin, acrylic ester, polyoxymethylene, fluoroplastics, polycarbonate, etc., and are widely used in plastic production , Plastic products, petrochemical industries and related colleges, research institutes and commodity inspection departments.
Features:
1. High-precision Chinese and English color controllers, specially customized membrane buttons, have unparalleled advantages in control accuracy and service life
2. The manual automatic cutting is integrated control, accurate to 0.1s, and the cutting time and cutting times can be set arbitrarily.
3. Built-in micro printer, can print test data
4. Double temperature control system, using double imported heating coils and double imported PT100 platinum resistance sensors to improve test accuracy and temperature stability.
5. Add displacement sensor to test MVR (volume method) with an accuracy of 0.01mm.
6. The volume method test does not need to be cut, and the test result can be directly output
7. The density value of the material at a specific temperature can be calculated by the ratio of the volume method and mass method
8. It can be connected to the computer via USB, and the test conditions can be set on the computer through the software, and the data can be printed and stored (optional).
Test method:
Mass method, volume method (MFR, MVE)
Display mode:
4.3 color touch screen display
Main technical parameters:
Temperature range: 0℃-450℃
Temperature fluctuation: ±0.2℃
Temperature uniformity: ±1℃
Temperature display resolution: 0.1℃
Time display resolution: 0.1S
Die diameter: Φ2.095±0.005mm
Length of discharge port: 8.000±0.025mm
Diameter of charging cylinder: Φ9.550±0.025mm
Weight accuracy: ±0.5%
Displacement measurement accuracy: 0.01mm
Volume method timing accuracy: 0.001S
Displacement measurement encoder: Omron photoelectric rotary encoder
Quality method test range: 0.1-150g/10min
Volume method test range: 50-5000cm³/10min
Output mode: micro automatic printout
Cutting method: manual and automatic cutting
Test load: a full set of eight-level weights
Power supply voltage: AC220V±10% 50HZ
