Intelligent Ammonium Hydroxide Density Concentration Online Monitor Tester MAY-2001-AS
Provide customized automation control functions
Special reminder:
Our factory produces and sells online tuning fork densitometer, online refractometer, online density meter (differential pressure method), online density meter (buoyancy method), handheld density meter, handheld brix meter, handheld density meter, etc. Comes with 4-20MA/485 and other signal output, explosion-proof, corrosion-resistant, high-temperature, and supports remote data transmission. Professional engineers can free installation drawings based on the customer's on-site environment.
Introduction
MAY-2001 ammonia water concentration online measurement and control system (ammonia water online concentration meter) draws liquid ammonia from the liquid ammonia zone (pure ammonia) and pumps it into the ammonia pool. A certain amount of water has been pumped into the ammonia pool according to the calculation. The liquid ammonia and water mix to form a certain amount The concentration of ammonia water is pumped to the corresponding workshop through the pump, and the concentration of ammonia water is measured and controlled in real time.
High and low ammonia concentration is detrimental to the downstream electrolysis workshop and compounding workshop and will increase the consumption of more raw materials. Therefore, the concentration of ammonia must be monitored and the concentration of ammonia can be adjusted by changing the amount of feed.
MAY-2001 ammonia water concentration online measurement and control system adopts high-precision online concentration sensor, integrated 4.3-inch high-resolution display controller and high-pressure automatic cleaning components. It is easier to read data and set control parameters (such as user set concentration upper and lower limits, output thresholds and PID parameters, etc.). This product can be widely used in mechanical processing, food, beverage, pharmaceutical and chemical industries. The online concentration meter can be used in dilution The monitoring of the process, mixing process and the concentration/moisture/mixing ratio of the final product can also be used to monitor the effect of the online cleaning process.
The online concentration sensor of MAY-2001 ammonia water concentration meter has built-in high-precision concentration measuring elements and imported temperature sensor, which can provide factory linear calibration and automatic temperature compensation for the measured solution value, and transmit measurement data to the central controller in real time.
Function&Feature
1. In the reaction kettle, sealed barrel, open slot, pipeline and other occasions, the sensor is fixed by means of chuck, thread, flange, etc., online monitoring of the relative density, specific gravity concentration, Baume degree, temperature of various chemical liquids.
2. Using intelligent chip design, the MAYZUM ammonia water concentration online measurement and control system (ammonia water online concentration meter) has a smart brain. Users can set control parameters according to their needs, and can achieve analog output, digital communication output, and network output.
3. Two-in-one measurement and automation control, discarding secondary instruments, discarding transmitters, discarding PLC, discarding DCS, easier on-site installation, more direct online measurement and control, and lower failure rate;
4. According to the different technical requirements of the target industry, we have a number of different types of products for users to choose;
5.The overall all-stainless steel sealing design can better adapt to the complex environment on site. The 3C test certification has reached the IP67 protection level;
6. Integrated high-pressure compressed air, high-pressure water and other cleaning devices;
7. Master the most sophisticated detection technology, the highest accuracy of online detection can reach 0.01%, and the control accuracy can reach 0.2%;
8. Using high-resolution physical CCD to identify the wafer
9. Comes with powerful online software, multi-level users, display, record, and trace to meet the requirements of the pharmaceutical industry;
Technical parameters:
Intelligent Ammonium Hydroxide Density Concentration Online Monitor Tester
Measuring range | Density:0.0000 ~ 2.0000 | Resolution: | Density:0.0001g/cm³ |
Concentration:0.0 ~ 100.0% | Concentration:0.1% | ||
Temperature: 0.0 ~ 100.0ºC | Temperature: 0.1ºC | ||
Measurement error: | Density:±0.005g/cm³ | Ambient temperature: | 0.0 ~ 100.0ºC |
Concentration:±1% | Measurement method: | Partially immerse the sensor probe in the liquid for measurement | |
Temperature: about ±5ºC (due to heat conduction) | Maximum flow rate: | 100m/min | |
Reading interval | 500ms | Protection grade: | Sensor liquid measurement position IP67 |
Sensor material: | 316L stainless steel (hastel alloy is optional) | Installation method: | chuck, thread, flange (vertical, horizontal, oblique angle, etc.) |
Probe length: | 77mm(the part inserted into the liquid, the length can be customized) | ||
Output signal: | Default RS232 or 485 Modbus RTU digital value, optional switch value, 4~20mA output | ||
Power supply: | DC 24V,2A | Configuration: | 4.3-inch display controller, probe, circulating measurement slot |
